Actividades Correspondientes Al Año 2014
- Rosales, C; Sabino M.A; Perera, R; Hector Rojas; Numalbert Romero. "ESTUDIO DE MEZCLAS DE POLI (ÁCIDO LÁCTICO) CON POLIPROPILENO Y NANOCOMPUESTOS CON MONTMORILLONITA". Revista Latinoamericana de Metalurgia y Materiales (RLMM) . 2014. Indexada en el Latindex Catálogo, Vol. 34(1), pp. 158 - 171.
- Rojas, Hector; Rosales, C; Gonzalez, Carolina; Perera, R; Trujillo, Mariselis. "INFLUENCIA DE LA DEGRADACIÓN DURANTE EL PROCESADO EN LAS PROPIEDADESrnREOLÓGICAS, TÉRMICAS Y DE TRACCIÓN DE COMPUESTOS DE POLI(ÁCIDO LÁCTICO)". Revista Latinoamericana de Metalurgia y Materiales. 2014. Indexada en el Catálogo Latindex, Vol. 34 (1), pp. 118 - 135.
Actividades Correspondientes Al Año 2013
- Pelliccioni, Orlando; Candal, M; Bermeo, Madeleyne; Müller-Karger, C.M. "Comparative analysis of materials during design process of prosthetic foot by using plastic injection molding simulation FE tool ". Health Care Exchanges (PAHCE), 2013 Pan American. 2013. Indexada en el IEEE Xplore. . Vol. 2327-8161, pp. 1 - 6.
- Pelliccioni, Orlando; Arzola, Karina; Candal, M. "Computer assisted design of a rotational molding mold for low cost manufacturing of upper limb prosthetic device ". Health Care Exchanges (PAHCE), 2013 Pan American . 2013. Indexada en el IEEE Xplore. . Vol. 2327-8161, pp. 1 - 6.
- Pelliccioni, Orlando; Candal, M; Arzola, Karina; Panacci, Teresita. "Design of dental training devices for taking impression of cleft lip and palate and their respective rotomoulding molds ". Health Care Exchanges (PAHCE), 2013 Pan American. 2013.
- Perez, R.; Torres, A.; Candal, M. "Efecto de las variables del proceso de extrusión sobre la relación estructura–propiedades de películas tubulares de PEBD". Revista iberoamericana de polimeros. 2013. Indexada en el LATINDEX. . Vol. 14(5), pp. 257 - 274.
- Davila, E.; Candal, M; Sanchez-soto, M. "Estudio de la adhesión en uniones poliméricas sobreinyectadas rígido–rígido (ABS/SAN)". Revista latinoamericana de Polimeros. 2013. Indexada en el LATINDEX. . Vol. 14(6), pp. 275 - 292.
- Candal, M; Zaldumbide, P.; Morales, R. "Optimización del sistema de refrigeración de un molde de inyección para pieza de uso médico utilizando herramientas CAE". Ciencia e Ingeniería. 2013. Indexada en el Revencit, Actualidad Iberoamericana, LATINDEX. . Vol. 34 (2), pp. 53 - 62.
Actividades Correspondientes Al Año 2012
- Candal, M; Rojas, Hector; Campero, Joel. "Criterio de convergencia en piezas plásticas inyectadas de poliestireno". REVISTA DE LA FACULTAD DE INGENIERÍA DE LA UNIVERSIDAD CENTRAL DE VENEZUELA. 2012. Indexada en el LATINDEX, ENGINEERING INDEX, Y OTROS. . Vol. 27 (2), pp. 67 - 79.
Actividades Correspondientes Al Año 2011
- Candal, M; Hernández, M. "Diseño de un molde de inyección con un sistema de cavidades intercambiables y deslizantes". REVISTA DE LA FACULTAD DE INGENIERIA DE LA UNIVERSIDAD CENTRAL DE VENEZUELA. 2011. Indexada en el LATINDEX, ENGINEERING INDEX, Y OTROS. . Vol. 26 (1), pp. 59 - 69.
- Núñez, Alexander; Pelliccioni, Orlando; Candal, M; Müller-Karger, C.M. "Mecanizado de un prototipo de prótesis de pie dinámico empleando polioxido de metileno". Revista Latinoamericana de Metalurgia y Materiales. 2011. Indexada en el Latindex, SCIELO. . Vol. S3, pp. 38 - 39.
- Ichazo, M; Carmen Albano; Marianella Hernández; González, J; Jenny Peña. "Characterization of Natural Rubber/Cassava Starch/Maleated Natural Rubber Formulations".Revista Latinoamericana de Metalurgia y Materiales. 2011. Indexada en el Metals Abstracts Index. . Vol. On line, pp. 71 - 84.
Actividades Correspondientes Al Año 2010
- Albano, C.; Perera, R; Silva, P. "Effects of Gamma Radiation in Polymer Blends, in Composites with Micro and Nano Fillers and in Functionalized Polyolefins". Revista Latinoamericana de Metalurgia y Materiales. 2010. Indexada en el Compendex. Artículo Invitado. . Vol. 30, pp. 3 - 27.
- Palacios Jordana; Perera, R; Rosales, C. "INFLUENCIA DE LA MORFOLOGÍA EN LAS PROPIEDADES DE NANOCOMPUESTOS DE MEZCLAS DE POLIPROPILENO/POLIETILENO METALOCÉNICO". Revista de la Facultad de Ingeniería de la Universidad Central de Venezuela. 2010. Indexada en el Compendex. . Vol. 25, pp. 107 - 120.
Actividades Correspondientes Al Año 2009
- Morales, R; Candal, M; Robles, J. "Efecto del proceso de transformacion sobre el coeficiente de endurecimiento por deformación en polímeros". Revista de la Facultad de ingeniería de la UCV. 2009. Indexada en el Compendex Engineering Index Fluid Abstracts Geoarchive Geological Abstracts GeoRef Geoscience Documentation SciELO Scopus. . Vol. 24 (4), pp. 61 - 71.
- Albano, C.; Perera, R; Karam, A.; Sánchez, Y.; Silva, P. "Efecto de la Radiación GAMMA en el PP Estabilizado con Diferentes Aditivos". Revista de la Facultad de Ingeniería de la UCV. 2009. Indexada en el Compendex. . Vol. 24, pp. 59 - 69.
- González, J; Carmen Albano; Hernández, M; Ichazo, M; Mary Lavady. "Characterization of polypropylene/cassava starch compounds obtained in an internal mixer". Revista de la Facultad de Ingeniería de la U.C.V.. 2009. Indexada en el Engineering index, bibliography and Index og Geology, Fluid Abstract, Geological Abstract, etc. . Vol. 24, pp. 31 - 44.
Actividades Correspondientes Al Año 2008
- Perera, R; Rosales, C; M. A. Araque; M. A. Coelho. "Composites of PET and PBT/PP with bentonite". Advanced Materials Research. 2008. Indexada en el Compendex. . Vol. 47-50, pp. 1019 - 1022.
- Rosales, C; Contreras, Vicente ; Matos, M.; Perera, R; N. Villarreal; R. Gallego; J. M. Pastor. "Thermal and tensile properties of PP nanocomposite blends". Advanced Materials Research. 2008. Indexada en el Compendex. . Vol. 47-50, pp. 21 - 24.
- Silva, Pedro; Albano, Carmen; Perera, R. "Use of Electron Paramagnetic Resonance to Evaluate the Behavior of Free Radicals in Irradiated Polyolefins". Revista Latinoamericana de Metalurgia y Materiales. 2008. Indexada en el Latindex. Artículo Invitado. . Vol. 28, pp. 79 - 90.
- Ichazo, M; Albano, C.; Hernández, M; González, J; Carta, A. "Effects of Particle Size and Size Distribution on the Mechanical Properties of EPDM/Silica Vulcanizates". Advanced Materials Research. 2008. Indexada en el Compendex, Chemical Abstract, Metal Abstract, etc.. . Vol. 47, pp. 113 - 116.
- Hernández, M; Ichazo, M; González, J; Albano, C.; Santana, O.. "Fracture Behavior of Polypropylene/Elastomer Blends". Advanced Materials Research. 2008. Indexada en el Compendex, Chemical Abstract, Metal Abstract, etc.. . Vol. 47-50, pp. 278 - 281.
- Hernández, M; Ichazo, M; González, J; Albano, C.; Santana, O.. "IMPACT BEHAVIOR OF POLYPROPYLENE /STYRENE-BUTADIENE-STYRENE BLOCK COPOLYMER BLENDS". Acta Microscópica. 2008. Indexada en el Latindex. . Vol. 17(1), pp. 66 - 71.
Actividades Correspondientes Al Año 2007
- Rosales, C; B. Cardozo; Y. Brito; Perera, R; Matos, M.. "EStudio de Mezclas Ternarias de Poliamida-6 con Polietilenos". Revista de la Facultad de Ingeniería de la UCV. 2007. Indexada en el Compendex Index, . . Vol. 22 (No. 4), pp. 13 - 23.
- Rosales, C; Matos, M.; Perera, R; Karina Nuñez; Lorena Rivas; Massimiliano Scattolini. "Estudio de Propiedades Mecánicas de TPV de EPDM/Polipropileno/Aceite Parafinado".Rev. Téc. Ing. de la Univ. Zulia. . 2007. Indexada en el Compendex, Chemical Abstract, Metal Abstract, etc.. . Vol. 30, pp. 445 - 453.
- C. Albano; J. Papa; W. Baré; González, J. "Avrami equation inadequacy for modelling the HDPE isothermal crystallization rates". Revista de la Facultad de Ingeniería de la U.C.V.. 2007. Indexada en el Engineering index, bibliography and Index og Geology, Fluid Abstract, Geological Abstract, etc. . Vol. 22, pp. 71 - 77.
- González, J; Rosales, C; Hernández, M; Ichazo, M. "Study of the behaviour of poly(vinyl chloride) with functionalized polyethylene blends". Rev. Téc. Ing. de la Univ. Zulia. 2007. Indexada en el Compendex, Chemical Abstract, Metal Abstract. Vol. 30, pp. 437 - 444.
Actividades Correspondientes Al Año 2006
- González, J; Albano, Carmen; Candal, M; Ichazo, M; Hernández, M; Mayz, M; Martinez, A. "Caracterización de compuestos a base de poliolefinas-conchas de mar ". Revista de la Facultad de Ingenieria de la UCV. 2006. Indexada en el Compendex Index, Geological Abstracts, Hidrotiltles, Bibliography of Economic Geology. Vol. 21, pp. 89 - 104.
- Morales, R; Candal, M. "Diseño y Fabricación de un Molde de Termoformado utilizando herramientas CAD/CAE". Revista de la Facultad de Ingeniería de la UCV. 2006. Indexada en el Engineering Index, Geological Abstracts, Hidrotiltles,GeoArchive Geobase. Vol. 21 (1), pp. 83 - 100.
- Rosales, C; Perera, R; Matos, M.; Poirier, T; Héctor Rojas; Jordana Palacios; Sharon Quintana. "Influencia de la Morfología sobre las Propiedades Mecánicas de Nanocompuestos y Mezclas de Polímeros". Revista Latinoamericana de Metalurgia y Materiales. 2006. Indexada en el LATINDEX. Artículo Invitado. . Vol. 26, pp. 3 - 19.
- C. Albano; A. Karam; N. Domínguez; Y. Sánchez; González, J. "Efecto de la radiación gamma en compuestos de polimetilmetacrilato/algas calcáreas". Revista de la Facultad de Ingeniería de la U.C.V.. 2006. Indexada en el Engineering Index. . Vol. 21, pp. 21 - 28.
- Hernández, M; González, J; Albano, Carmen; Ichazo, M; Lovera, Deliani. "Thermal and Mechanical Characterization of PP/NBR Blends". Revista de la Facultad de Ingeniería UCV. 2006. Indexada en el Engineering Index. . Vol. 21(1), pp. 5 - 12.
- González, J; Albano, Carmen; Candal, M; Ichazo, M; Hernández, M; Mayz, M; Martinez, A. "Caracterización de compuestos a base de poliolefinas-conchas de mar ". Revista de la Facultad de Ingenieria de la UCV. 2006. Indexada en el Compendex Index, Geological Abstracts, Hidrotiltles, Bibliography of Economic Geology. Vol. 21, pp. 89 - 104.
Actividades Correspondientes Al Año 2005
- Candal, M; Morales, R. "Integración CAD/CAE/CAM/PR en la Optimización del Diseño de Productos Plásticos: Un Caso de Estudio". Revista Ciencia e Ingenieria. 2005. Indexada en el Actualidad Iberoamericana. Vol. 26, pp. 1 - 7.
- Albano, C; Reyes-Romero, J; Ichazo, M; González, J; Hernández, M. "Mechanical, thermal and morphological behavior of PS/PP blends: High doses (70-1300 kGY) of gamma irradiation". Revista de la Facultad de Ingeniería, UCV. 2005. Indexada en el Engineering Index. . Vol. 20, pp. 85 - 94.
Actividades Correspondientes Al Año 2004
- Candal, M; Morales, R; González, O. "Aplicación de herramientas CAE para la Evaluación Mecánica de Estuhes para Discos Compactos". Revista de la Facultad de Ingeniería. 2004. Indexada en el RACI. Artículo Invitado. . Vol. 19, pp. 37 - 50.
- Perera, R; Rosales, C; Márquez, A.; L. Montaño. "Estudio de Mezclas de Poli(tereftalato de Butilo) con Polietileno.". Revista de la Facultad de Ingeniería de la U.C.V.. 2004. Indexada en el Engineering Index, Bibliography, Index of Geology, Fluid Abstracts.. . Vol. 19, N0. 1, pp. 89-10, pp. 89 - 106.
- Albano, C; Reyes-Romero, J; Moronta, D; Davidson, E; González, J; Ichazo, M. "ESR INVESTIGATIONS ON GAMMA IRRADIATION ON BLENDS OF PP/VIRGIN HDPE AND PP/RECYCLED HDPE". Revista de la Facultad de Ingeniería, UCV. 2004. Indexada en el Engineering Index. . Vol. 19(2), pp. 115 - 122.
Actividades Correspondientes Al Año 2003
- Albano, C; Poleo, R; Reyes, J; González, J; Ichazo, M. "CONSIDERATIONS ON THE MECHANICAL PROPERTIES OF GAMMA IRRADIATED POLYETHYLENE REINFORCED WITH SISAL FIBERS". Revista de la Facultad de Ingeniería, UCV. 2003. Indexada en el Engineering Index. . Vol. 18(1), pp. 83 - 87.
Actividades Correspondientes Al Año 2002
- Candal, M; Morales, R; González, O. "La Gestión del Mercadeo como una importante herramienta para la optimización de productos: Un caso de estudio". Espacios. 2002. Indexada en el REVENCYT, FUNDACITE. . Vol. 23(3), pp. 73 - 98.
- González, J; Albano, C; Ichazo, M; Espejo, L; Molina, K. "Análisis del Comportamiento Mecánico, Térmico y Morfológico de las Mezclas de PP/PEAD, PP/PEAD/EPR y PP con Aserrín". Revista de la Facultad de ingeniería, UCV. 2002. Indexada en el Engineering Index. . Vol. 17, pp. 67 - 80.
Actividades Correspondientes Al Año 1999
- Rosales, C; González, J; Rojas, H; MisinsKy, G; Vivas, M. "Estudio de Mezclas de Poliamida 6 con Copolímeros SEBS Modificados". Revista de la Facultad de Ingeniería UCV.. 1999. Indexada en el ISSN 0798-4065. . Vol. 14 (Número 2), pp. 89 - 102.